|
SM-10, 15
The SM-10, SM-15 has been designed
specifically to operate with strain gauge sensors such as LOAD CELL.
PRESSURE TRANSDUCER, TORQUE TRANSDUCER, LVDT. etc.
The setup sequence is simple and
quick using four push buttons only. External data hold function.
|
|
FS 8000
FEATURES Control for packer,hopper,checker,limit
scale,strain/compression tester,etc. Table or panel mounting
available. DIN Standard. Auto span calibration. Watch-dog
function installed for diagnostic. Shielded by aluminum case for
the immunity against all forms of radio frequency interference and
the susceptibility. Wide range of capacity and division can
be easily set by keyboard. Button tare,Digital,Auto tare.
Weight memory back-up for up to 10years. Peak-hold and sample-hold function.
High and low can be set by 2 step control. AUTO
FALL COMPENSATION RESPONSE SETTING SYSTEM 4 Control relay built-in (HIGH,LOW,FINISH,ZERO/EMPTY)
Weighing operation count can be displayed by function
key(COUNT key). The external field switch can be directly
connected to 5pin terminal located at the rear panel for the
remote control of some keyboard functions. (NET/GROSS, PRINT,TARE/HOLD,ZERO)
Can drive up to 8pcs of load cells(350 ¡×Ù ).
|
|
FS 1200A
FEATURES Control for packer,hopper,checker,limit
scale,strain/compression tester,etc. Table or panel mounting available.
DIN Standard. Auto span calibration. Watch-dog function installed for
diagnostic. Shielded by aluminum case for the immunity
against all forms of radio frequency interference and the susceptibility.
Wide range of capacity and division can be easily set
by keyboard. Button tare,Digital,Auto tare. Weight
memory back-up for up to 10years. Peak-hold and sample-hold function.
High and low can be set by 2 step control. AUTO
FALL COMPENSATION RESPONSE SETTING SYSTEM 4 Control relay built-in (HIGH,LOW,FINISH,ZERO/EMPTY)
Weighing operation count can be displayed by function
key(COUNT key). The external field switch can be directly
connected to 5pin terminal located at the rear panel for the remote
control of some keyboard functions. (NET/GROSS,PRINT,TARE/HOLD,ZERO)
Can drive up to 8pcs of load cells(350 ¡×Ù ).
|
|
FS 1020A
Control
for platform, tank, truck scale, train/compression tester,
etc. The external field
switch can be directly connected to 5 pin terminal located
at the rear panel for the remote control of some
keyboard function(NET/GROSS, PRINT, TARE/HOLD, ZERO and so
on) Weight
memory back-up for up to 10 years Peak-hold and Sample-hold
function Optionally
recalls real time (DATA & TIME),count, parts number, accumulated
total(SUB/GRAND) when the printer is interfaced (OP7) Can
drive up to 8 PCS of load cells (350¥Ø)
|
|
FS 2000A
Control for packer, hopper,
checker, limit scale, etc.
Displays High and Low row wise AUTO FALL COMPENSATION
RESPONSE SETTING SYSTEM 4 built-in control relays (HIGH,
LOW, FINISH, ZERO/EMPTY) The external field switch can be directly
connected to 5 pin terminal located at the
rear panel for the remote control of some
keyboard functions (STOP,
START, TARE, ZERO and so on).. |
|
FS 2051A
Control for packer, hopper,
checker, limit scale, etc
Displays Preset, Dribble
and Fall row wise AUTO
FALL COMPENSATION RESPONSE
SETTING SYSTEM 2
step control (BULK 90%, DRIBBLE 100%) Memory of 20 kinds of part numbers
4 built-in Control relays (90%=Preset-Dribble, 100%=Preset-Fall,
FINISH, ZERO/EMPTY) The external field switch can be directly
connected to 5 pin terminal located at the rear panel
for the remote control of some keyboard functions (STOP,
START, TARE/PRINT, ZERO and so on)
|
|
FS 2101A
Control for packer, hopper,
drum-filler, discharge, limit scale, etc. 3
step control (1st=Bulk, 2nd=Preset-Dribble.
3rd=Preset-Fall) AUTO
FALL COMPENSATION RESPONSE SETTING SYSTEM
Memory of 50 kinds of part numbers BCD Input (external
input of part number) in 2 digits
Display of accumulated total 6 built-in Control
relays (1st 70%, 2nd 90%, 3rd 100%, FINISH,
ZERO/EMPTY, LOW, HIGH)
The external field switch
can be directly connected to 5 pin terminal located at the rear
panel for the remote control of some keyboard
functions (STOP, START, TARE/PRINT, ZERO and
so on) |